BEST COMPANY SLOGAN HERE...
CLIFFORD UNDERWOOD HYDRAULIQUE LTÉE.
CLIFFORD UNDERWOOD HYDRAULIQUE LTÉE.
Model : MSC-6
Mobile lift uses "pallet jack" style hydraulics to raise lift onto wheels
Rolls right under vehicle or use the unique drive over design to easily position lifting points.
Thick 13" x 10" column
Chain over design uses a 3"x36" cylinder and 846 leaf chain.
Single point lock release.
Powder coat paint finish.
Vérins NYTRO 1 Colonnes Mobile
Gallerie Photo
MSC-6K
À votre service depuis 1950...
C'est l'éxperience qui fait la différence
Model : TP9KAC
9,000 lb lifting capacity
Asymmetric design
Dual cylinders with low friction chain rollers
Low profile automatic arm restraints
Vérins NYTRO 2 colonnes
TP9KAC
Stackable drop-in height adapters
Free mounting hardware
Powder-coated paint finish
Electric override automatic safety shut-off
Model : TP9KF
9,000 lifting capacity
Symmetric design
Dual cylinders with low friction chain rollers
Low profile automatic arm restraints
Stackable drop-in height adapters
Free mounting hardware
Powder-coated paint finish
TP9KF
Model : TP12KF
Dual 3" cylinders with low friction chain rollers
"Big Foot" base plates for extra stability
Low profile arm restraints
Durable powder coat paint finish
Free hardware
Powder coat paint finish
TP12KF
Copyright © 2007 - 2010, Clifford Underwood Hydraulique Ltée. Tous droits réservés. Réalisé par Slim Bouzouaia, experts en création de sites Web.
Vérins NYTRO 4 colonnes
Model : FP14K
14,000 lb Lifting capacity
Chain drive
Single point pneumatic safety release mechanism
20" non-skid, diamond plate runways
Model : FP14KA
14,000 lb Lifting capacity
Chain drive
Single point pneumatic safety release mechanism
20" wide non-skid, diamond plate runways
Powder-coated paint finish
Gallerie Photo
Powder-coated paint finish
C-channel construction
Hydraulic Operation for minimum maintenance
C-channel construction
Hydraulic Operation for minimum maintenance
Three turntable positions for a wide range of vehicles
Rear slip plates mounted on roller bearings
Fully adjustable lock stops for easy leveling
Model : FP8K-DS-A
Carriages completely enclosed for safety
Redundant ladder lock safety system with "auto engage" locking bar in the event of cable failure
Extra large slider blocks for added stability - 10 lock positions
Aircraft quality cables rated at 14,500 lbs
Model : FP8K-DS-EXT-A
Overall length with ramps 222 1/2"
Overall width 109 1/2"
Overall height 96"
Track length 180 1/2"
Lifting height 82 1/4"
Vérins NYTRO Storage/Service et Stationnement
Gallerie Photo
18" wide runways formed with one-piece 3/16" non-skid diamond plate
Easy operation: Lock release handle located near power unit
Large 3" diameter cylinder - Many options available!
Width between posts 100 5/16"
Maximum clearance 77 15/16"
Weight 1914lbs
Lifting capacity 8,000 lbs.
Model : LR-26-PAD
6,000 lb. lifting capacity
Automatic safety locks
Low drive-over height for approach of low vehicles
High speed motor lifts from 3"- 26" in only 35sec
2 sets of rubber riser blocks
Vérins NYTRO Ciseau
Gallerie Photo
Model : MR6K-38
•6,000lb. lifting capacity
•Automatic double safety lock system with air release
•38" working height
•4" drive-over height for approach of low vehicles
•Wheel kit, tow bar and rubber riser blocks standard
•Portable trolley for power unit and safety lock air release control
Model : MR6K-48
6,000lb lifting capacity
Portable trolley supports pump and moves lift
Twin hydraulic cylinders
Easily adjustable sliding radius arms
Model : SL-12K-A
12,000 lb lifting capacity
True scissors design
complete access to all wheel alignment procedures
Wide 25" tracks
Automatic two position safety lock.
Swivel pads standard
Optional drop in height adapters available
Automatic leveling locks
Free mounting hardware
Powder-coated paint finish
Optional 6,600lb. cap low profile rolling jack
Model : SC-2K
Takes up a minimum of space. Offers a maximum of storage
Park front of car under platform for full use of garage space
Platform dimensions 61" x 64"
58" of clearance under platform
Gallerie Photo
Column height 83 1/2"
Runs on regular 110vac
Optional wheel vise available
VÉRINS NYTRO LIFTS
Model : M-1000C
1,000 lb lifting capacity
Air-powered lift
Ideal for motorcycles, snowmobiles, ATVs, jet skis, etc.
Extra-large platform
30" Working height
Choose from a range of accessories to customize this table for your shop
Model : M-1500C-HR
1,500 lb lifting capacity
Air/hydraulic pump
Ideal for motorcycles, snowmobiles, ATVs, jet skis, etc.
Extra-large platform
Vérins NYTRO Motocycle
Gallerie Photo
38" Working height
Side extensions and vise come standard (see larger image)
Built in drop-out panel